Battery Operation; Battery Safety - Lincoln Electric VIKING PAPR 3350 Manual Del Proprietário

Ocultar thumbs Ver también para VIKING PAPR 3350:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 165

battery oPeration

WARNING

Battery Safety

Keep battery away from fire or heat as this may cause
the battery to explode and may result in serious injury
or death.
Battery should be charged with supplied Li-ion charger
only. Charge in an open, well-ventilated location.
The charger is designed only for use indoors.
Do not allow the battery to get wet.
Do not attempt to disassemble or repair the battery.
There is no maintenance on Li-ion batteries.
Battery disposal – battery must be disposed of properly
or recycled.
Charging of battery pack
Charge battery before first use or if battery has not
been used for one week. Always recharge the battery
before it becomes fully discharged.
Batteries not in use should be charged at least once a
year.
Remove battery pack from blower assembly. Connect charger
cord to battery terminal. Plug charger into 120/240 VAC
receptacle. Use European/Australian plug adapter if necessary.
The battery pack does not need to be discharged before it is
charged.
The charger indicator light will turn red in color when battery
pack is being charged. When battery pack is finished charging,
the indicator light will turn green letting the user know that the
battery is fully charged (normal charge time approximately 3
hours). Although it is okay to leave the battery pack connected to
the charger, it is recommended that once the battery pack is fully
charged to disconnect battery pack from charger.
VIKING PAPR 3350 WELDING HELMET
FIGURE 1
Battery
Pack
Battery
Charger
Battery
Terminal
9
120 VAC
Outlet
Indicator
Light

Publicidad

Tabla de contenido
loading

Tabla de contenido