Lubricating The Throttle Grip And Cable; Lubricating The Brake And Shift Pedals; Lubricating The Brake And Clutch Levers; Lubricating The Side Stand - Malaguti XTM X3M Manual De Uso Y Mantenimiento

PERIODIC MAINTENANCE AND MINOR REPAIR

LUBRICATING THE THROTTLE GRIP AND CABLE

Grease the throttle grip assembly and the accelerator cable. The
1
knob must be removed to access the end of the cable. After re-
moving all screws, you can detach the cable; hold it up and let the
2
lubricant drip along the cable. Grease the metal surfaces of the
throttle grip assembly with multipurpose grease.
3
LUBRICATING THE BRAKE AND SHIFT
4
Lubricate the articulations.
5 Recommended lubricant: engine oil.
6

LUBRICATING THE BRAKE AND CLUTCH LEVERS

Lubricate the articulations.
7
Recommended lubricant: engine oil.
8

LUBRICATING THE SIDE STAND

9
Lubricate the articulations and metal-to-metal contact surfaces.
Make sure the side stand rises and lowers smoothly.
Recommended lubricant: engine oil.
If the side stand does not move smoothly, contact a
Dealer.
MALAGUTI
44
All manuals and user guides at all-guides.com

CHECKING THE FRONT FORK

Visual check
Check the inner tubes for scratches, damage and any oil leak-
age.
PEDALS
Checking operation
•
•
• Push the handlebar down hard several times to check whether
ENGLISH
Securely support the vehicle so that there is no danger
of it falling over.
Place the vehicle on a level surface.
With your hands on the handlebar, keep the vehicle upright
and apply the front brake.
the fork rebounds correctly.
If any damage is found or the front fork does not oper-
ate smoothly, contact a Dealer.
MALAGUTI