Installation Steps; Care And Cleaning - AVS Ventvisor Deflector Instrucciones De Instalación

Installation Steps

To facilitate positioning raise window up fully and open door slightly.
The visor should not obstruct opening and closing of door. Align the
part with the previously prepared areas.
3
With the visor in its final position, remove the remaining tape liner
by pulling on free ends.
5

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International,
Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of
installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Gently press the exposed areas of tape against the trim and verify
position. Open door to ensure visor does not obstruct door.
visor
trim
rear
window
4
Apply pressure along all flanges to ensure proper adhesion of tape.
6
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
Repeat Steps 1-6 for opposite side.