Installation Steps - AVS Bugflector Instrucciones De Instalación

Installation Steps

Center part on front edge of hood and align holes under weatherstrip. NOTE: weatherstrip should be OVER flanges at INBOARD locations.
2
Install a screw with washer in each of the (4) inboard
3
5
Care and Cleaning
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
Weatherstrip
hole locations.
hood
hood shield
weatherstrip
washer
screw
Close Hood.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2007 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo, Chromeflector
TM TM
Flanges
OUTBOARD
INBOARD
Install a self tapping screw in each of the (2) outboard
4
Apply bump ons to surface of hood and fenders.
6
, and the AVS logo are trademarks of Lund International, Inc.
TM TM
Page 2 of 2
hole locations.
hood
hood shield
screw