Stel TIG μP 261H 1f Manual De Instrucciones página 50

TIG µP 261H - 263H
TECHNICAL DESCRIPTION
PARAMETERS (JOB MODE)
Function active for all welding modes
This function allows you to store and load all the settings made on the generator at
any time. It is possible to save 99 welding parameters (settings) .
STORING WELDING SETTINGS
1) Hold down simultaneously for 1 second the buttons bC (ref.15 page 9) and PG
(job mode) (ref.17 page 9); you will hear a double sound of the buzzer and the
letters PrG will blink on the left-hand display (ref.21 page 9) .
2) With the encoder A (ref.5 page 9) select the number of the programme in which
you want to save the welding parameters .
3) Hold down the HF ON button (ref.7 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters Sto will blink on the left-hand display
(ref.21 page 9). At this point the programme has been saved and you can continue
using the machine.
LOADING STORED WELDING PROGRAMMES
1) Hold down simultaneously for 1 second the buttons bC (ref.15 page 9) and PG
(ref.17 page 9); you will hear a double sound of the buzzer and the letters PrG will
blink on the left-hand display (ref.21 page 9).
2) With the encoder A (ref.5 page 9) select the number of the programme that you
want to load .
3) Hold down the SU button (SET) (ref.8 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters ReC will blink on the left-hand display
(ref.21 page 9).
At this point the programme has been loaded and you can continue using the
machine.
ATTENTION : a welding programme can be stored on a programme number
already stored. The data of the deleted programme will be irretrievably lost.
50
ENGLISH
COD. 6907600050
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TIG µP 261H - 263H
TECHNICAL DESCRIPTION
PARAMETERS (JOB MODE)
Function active for all welding modes
This function allows you to store and load all the settings made on the generator at
any time. It is possible to save 99 welding parameters (settings) .
STORING WELDING SETTINGS
1) Hold down simultaneously for 1 second the buttons bC (ref.15 page 9) and PG
(job mode) (ref.17 page 9); you will hear a double sound of the buzzer and the
letters PrG will blink on the left-hand display (ref.21 page 9) .
2) With the encoder A (ref.5 page 9) select the number of the programme in which
you want to save the welding parameters .
3) Hold down the HF ON button (ref.7 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters Sto will blink on the left-hand display
(ref.21 page 9). At this point the programme has been saved and you can continue
using the machine.
LOADING STORED WELDING PROGRAMMES
1) Hold down simultaneously for 1 second the buttons bC (ref.15 page 9) and PG
(ref.17 page 9); you will hear a double sound of the buzzer and the letters PrG will
blink on the left-hand display (ref.21 page 9).
2) With the encoder A (ref.5 page 9) select the number of the programme that you
want to load .
3) Hold down the SU button (SET) (ref.8 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters ReC will blink on the left-hand display
(ref.21 page 9).
At this point the programme has been loaded and you can continue using the
machine.
ATTENTION : a welding programme can be stored on a programme number
already stored. The data of the deleted programme will be irretrievably lost.
50
ENGLISH
COD. 6907600050
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it