Stel TIG μP 261H 1f Manual De Instrucciones página 61

ENGLISH
TIG µP 261H - 263H
COD. 6907600050
TIG WELDING ON COPPER
- Due to the properties already described, TIG welding is also excellent for working
on materials with high heat conductivity. The gas used is always argon and, in the
case of copper, the use of a reversed support is recommended.
- Preparation of the edges for welding copper (flat butt joint).
- The electrode used is of the same type described for welding steel; it is prepared
as described above.
- To avoid possible oxidation in the welded area, weld materials containing
s (mm) a (mm)
1÷3 0
4÷10 0
phosphor, silicon and deoxidizing components are used.
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL DESCRIPTION
d (mm) α(°)
0 0
1-s/4 0
61
ENGLISH
TIG µP 261H - 263H
COD. 6907600050
TIG WELDING ON COPPER
- Due to the properties already described, TIG welding is also excellent for working
on materials with high heat conductivity. The gas used is always argon and, in the
case of copper, the use of a reversed support is recommended.
- Preparation of the edges for welding copper (flat butt joint).
- The electrode used is of the same type described for welding steel; it is prepared
as described above.
- To avoid possible oxidation in the welded area, weld materials containing
s (mm) a (mm)
1÷3 0
4÷10 0
phosphor, silicon and deoxidizing components are used.
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL DESCRIPTION
d (mm) α(°)
0 0
1-s/4 0
61