Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Correct the date
the date can be set by using the quick set function
of the hour hand in either the clockwise or counter
clockwise direction. Depending on the direction of
rotation, the date is reset at midnight to the previ-
ous or the next day.
1
release the crown and pull
it out to position 2.
2
set the current date using
the hour hand by rotating
the crown. the red 24-hour
hand does not move.
3
Press the crown against
the case and simultaneously
turn clockwise until it is
firmly secured.
En
10
Measure time (chronograph)
the chronograph can be used to measure time
intervals for up to 12 hours exactly to 1/ 8 second.
the time measured can be read using the seconds,
minutes and hours counters.
1
start measuring time using
the
P1
pusher. the seconds
counter is in motion.
2
to stop measuring time,
press the
P1
pusher again
and read where it stopped.
3
use the
P2
pusher to reset
all the counters to zero.
Cleaning and maintenance
cleaning:
to clean the outer surface of the watch,
wipe it gently with a microfiber cloth. use a fine
toothbrush and a bit of soapy solution to clean the
back of the watch and the metal band. Dry using a
lint-free towel. Minimize contact between the
leather straps and the water.
Maintenance:
As a mechanical instrument, a
watch requires maintenance by an authorized
service center about once every four years.
Water resistance
A watch tested to 5 atm (50 m) may be worn while
bathing, showering or swimming (such as in a
pool). Water resistance is guaranteed only if the
crown is screwed in and should be checked once
per year.
the binding nature of meter data:
30 m (3 atm)
Do not swim / dive
50 m (5 atm)
Bath, shower, swim
100 m (10 atm)
swim, snorkel
200 m (20 atm)
swim, snorkel, dive
300 m (30 atm)
Deep-sea diving
11
En
Publicidad
Tabla de contenido
