Denon DN-C680 Instrucciones De Operación página 13

ENGLISH
11 10.11
B
PROFESSIONAL CD PLAYER DN-C680
POWER
¢ ON OFF
£
LEVEL
MIN MAX
STOP PLAY/PAUSE
STANDBY/CUE
PHONES
11
(2) Starting Playback
Start playback.
Press the PLAY/PAUSE button.
10 Playback begins and the playback signals are output.
Flashing (indicates the playback position)
(3) Stopping Playback
When playback is stopped, the play finish mode set in
step 4 above is set.
Playback can be stopped in the following ways:
STOP
Playback is interrupted and the stop mode is set.
STANDBY/CUE STANDBY/CUE
11
PLAY/PAUSE PLAY/PAUSE
Sleep mode
¥ The sleep mode is set if no operation is performed for 30
minutes in the standby, pause or manual search mode.
¥ When in the sleep mode, press the PLAY/PAUSE button to
search for the position before the sleep mode was set and
start playback. Press the STANDBY/CUE button to search
for the position before the sleep mode was set and standby
at that point.
14
OPEN/CLOSE
PROG. PLAY PROGRAM
FINISH MODE
SEARCH I 6 7 SCAN
ON/OFF IN PLAY MODE END MON AUTO CUE TIME STOP
PITCH REPEAT
PUSH ENTER
8 9
AUTO SPACE INDEX NEXT
I A
AUTO EDIT FADER RECUE
B
PRESET
Lit Off
STANDBY/CUE
Flashing
Lit
Playback is interrupted, the pickup returns to
the play start position and the standby mode
is set.
Playback is interrupted and the
pause mode is set at that point.
Flashing
(4) PLAY / PAUSE and STANDBY/ CUE Operations
¥ The operation switches between playback and pause each
time the PLAY/PAUSE button is pressed.
¥ When the STANDBY/CUE button is pressed during playback,
the pickup returns to the position at which playback was
started.
The diagrams below show playback patterns when the
PLAY/PAUSE and STANDBY/CUE buttons are pressed.
PLAY and PAUSE
PLAY/PAUSE PLAY/PAUSE
button button
pressed pressed
Section
played
Pause mode set at this point
When the PLAY/PAUSE button is pressed, playback starts and
proceeds as shown by the arrow on the diagram above.
If the PLAY/PAUSE button is pressed again during playback, the
pause mode is set at that point. Press the PLAY/PAUSE button again
to resume playback.
PLAY and CUE
PLAY/PAUSE
STANDBY/CUE button pressed
button
pressed
Section
played
When the STANDBY/CUE button is pressed after starting playback
by pressing the PLAY/PAUSE button, the pickup returns to the
position at which playback was started and prepares for the next
playback.
Press the PLAY/PAUSE and STANDBY/CUE buttons alternately to
start playback repeatedly from the same position.
This function is called Ò Back CueÓ .
PLAY, PAUSE and CUE
PLAY/PAUSE PLAY/PAUSE
button button
pressed pressed
Section
played
If the pause mode is set and playback is then resumed, the position
to which the pickup returns with the Back Cue function changes.
PLAY/PAUSE button pressed
Position on disc
Section
played
Position on disc
Back Cue
PLAY/PAUSE
button STANDBY/CUE
pressed button pressed
Position on disc
Section
played