Periodic Maintenance - SEA SATURN 24V 600 Manual Del Usuario

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
10. SCREW COVER MOUNTING
At the end of the mechanical installation and after having
executed all the required adjustments, mount the two screw
covers on the operator as shown in Fig. 19.
Fig. 19
11.
ELECTRIC CONNECTIONS OF THE INSTALLATION (Fig. 20)
1
2
5) Key push botton
1) Saturn
6) Flasher
2) photocell Sx
7) Receiver
3) photocell Dx
4) Mechanical safety edge 8) Antenna
cod. 67410326
®
9
4
5
3
9) Warning notice
10) Junction box
11) Differential 16A - 30mA
12. RISK EXAMINATION
The points pointed by arrows in Fig. 21 are potentially
dangerous. The installer must take a thorough risk examination
to prevent crushing, conveying, cutting, grappling, trapping so
as to guarantee a safe installation for people, things and animals
( Re. Laws in force in the country where the installation has been
made. )
NOTICE
SEA s.r.l can not be deemed responsible for any damage or
accident caused by product breaking, being damages or
accidents due to a failure to comply with the instructions herein.
The guarantee will be void and the manufacturer responsibility
(according to Machine Law) will be nullified if SEA Srl original
spare parts are not being used.
Fig. 20
The electrical installation shall be carried out by a professional
technician who will release documentation as requested by the
laws in force (D.L.46/90).
DIRECTIONS that the installer must read carefully before
6
installing. Packaging materials such as plastic bags, foam
7
8
polystyrene, nails etc must be kept out of children's reach as
dangers may arise.
1xRG58
10

PERIODIC MAINTENANCE

Check the oil level
Change oil
11
Check the release functionality
Check the distance between pinion and gear rack (1.5
mm)
Check the usury status of pinion and gear rack
Check the fixing screws
Check the connection cables integrity
Check limit switch functionality and status in opening
and closing and the related small plates
All the above described operations must be done exclusively by an
authorized installer.
REV 01 - 07/2008
This is a quotation from the GENERAL
Fig. 21
Annual
4 years
Annual
Annual
Annual
Annual
Annual
Annual
13/33