SEA SATURN 24V 600 Manual Del Usuario página 9

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
The SATURN 24V is a gear motor for the automation of sliding
gates with lubrication of the gears in oil bath.
The irreversibility of the motor reducer allows a perfect and
safe gate closing, and makes the installation of an elecric lock
unneccessary. In case of electric power cut, the lock device
placed on the front part of the motor reducer allows the manual
opening and closing.
The emergency batteries (optional) grant the function of the gear
motor in case of power failure.
The operator comes with an adjustable anti-crushing device
granting the inversion of the gate in case of obstacles.
MAIN PARTS DENOMINATION
1 Adjustable foundation plate
2 Anchor bolts
3 Pinion protection
4 Adjusting screws cover
5 Pinion
6 Reducer release lever
8 8
10 10
6 6
4 4
2 2
TECHNICAL DATA
Power supply
Motor
Absorbed power
Working frequency
Working Temperature
Weight
Anticrushing clutch
Protection degree
Pinion Z16 speed
Maximum torque
Gate maximum weight
nductive/mechanical limit switch
I
cod. 67410326
®
SATURN 24V
MOUNTING AND CONNECTING INSTRUCTIONS
7 Toroidal transformer
8 Electronic control unit
9 Electric motor 24V
10 Fuse
11 Mechanical limit switch
9 9
11 11
3 3
1 1
SATURN 24V 600 SATURN 24V 1500
230Vac (±5%) 50/60 Hz
24Vdc
90W 150W
80% 60%
-20°C +55°C
14,0 Kg 14,5 Kg
Electronic
IP55
10 m/min
0 - 35 Nm 0 - 65 Nm
600 Kg 1500 Kg
SATURN 24V MOTOR REDUCER USING GRAPHIC
1500 Kg
1000 Kg
600 Kg
30%
60%
80%
DIMENSIONS (mm)
7 7
5 5
320
1. GATE ARRANGEMENT
Before starting with the installation check if all the gate parts
(fixed and mobile) have a strong and as less as possible
deformable structure, also make sure that :
a) The leaf is rigid and compact;
b) The inferior slideway is perfectly straight, horizontal and
without any obstacles which could obstruct the gate sliding;
c) The inferior sliding wheels are equipped with greasable or
water tightened bearings;
d) The superior slideway has been produced and placed so that
the gate is in a perfect vertical position;
e) Mechanical stops of the leaf are always installed in order to
avoid possible derailment of it.
REV 01 - 07/2008
600 - 1500
Motor reducer 24V
ENGLISH
9/33