Carl F. Bucherer PATRAVI SCUBATEC Manual Del Usuario página 3

PAT R AV I S C U B AT EC LEGEND
Date
Crown
Position 1: Winding
1 2 3
Position 2: Set date
Position 3: Set time
Rotatable bezel
Second
6 | E N G L I S H
YOUR WATCH
The Patravi ScubaTec dives into new dimensions: The sturdy
diving watch ensures pinpoint legibility with a diameter
of 44.6 mm. The unidirectional rotatable bezel, with its 4-mm
sapphire crystal and its automatic helium valve, offers func-
tionality under extreme conditions. The striking timepiece
with its stainless steel case is equipped with a highly-precise,
chronometer-certified CFB 1950.1 automatic movement.
Whether on land or water – the Patravi ScubaTec is certain to
come up in style.
TECHNICAL DATA
Automatic movement CFB 1950.1
Depth of the
movement 4.6 mm / 4.8 mm
Diameter of the
movement 26.2 mm
Number of jewel
bearings 25 / 26
Water resistance * 500 m | 50 atm
* see the chapter on "Water resistance"
START THE WATCH SET TIME
The movement is wound by the motion of the In order for the date to properly move at
wrist when worn. When not worn, the watch midnight, the hour hand must intentionally
stops after approximately 38 hours and has be set to a.m. or p.m. based on the current
to be wound manually. time.
1 Rotating the crown in the 1
counter clockwise direction
will automatically release
it to position 1.
2 Manually wind the move- 2
ment by rotating the
crown at least 30 times in
the clockwise direction.
3
Pull the crown until it is
in position 3. The second
hand does not move.
Move the crown counter-
clockwise until the date
changes. Then deliberately
set the current time either
a.m. or p.m.
Push the crown back into
position 1. The second
hand is back in motion.
E N G L I S H | 7