Wonder SPA Manual Del Usuario página 7

INFLATOR GAUGE
M
Z
The notes and technical specifications in this
manual are valid for the products listed below,
unless otherwise specified:
• Superdainu inflator gauge;
• 1999 inflator gauge;
• Eurodaimo inflator gauge;
• 2014 inflator gauge;
• 1997 inflator gauge.
CONTENTS
• 1 inflator gauge
• 1 hose
1
• Calibration certificate
PHASE 1
Mounting of the inflation gauge and connection to the air line
1. To mount the hose in the package, screw the hose connector (W) onto the
inflator gauge connection (Y) by hand until it comes into contact with the
gasket, then tighten a further ¼ turn using only a 12mm spanner.
2. Connect and tighten the other end of the inflator gauge to the compressor
or other source of compressed air/nitrogen using the ¼ GAS (Z) brass
threaded connection.
n. 1961 (150 cm) for standard valves − n. 1971 (60 cm) for standard valves (unique and
1
exclusive equipment of n. 1997) − n. 1961/3 (300 cm) for standard valves (optional on request)
B
S
A X
Once you have removed the items from
the box, please check that the product
and its components are complete and
without any visible damage that could
have occurred during transport.
7
WONDER SPA
W
Y
A -
Lever
B -
Dial
L -
Hole
M -
Handle
S -
Discharge valve
W -
Connector of the hose
X -
End connector
Y -
Connection
z -
Threaded metallic
attachment
L