C
• Do not use the dishwasher without a filter.
• Incorrect filter placement reduces washing efficiency.
• To keep your machine running smoothly, the filters should be cleaned regularly.
Spray arms
Ensure that the sprayer arm holes are not blocked and that no food waste or foreign objects
are trapped in the spray arms. If these holes are blocked, remove the spray arms and clean
them with water. To remove the upper spray arms, loosen the nut by turning it clockwise and
pulling it down. Ensure that the nut is fully tightened when refitting the upper spray arm.
Drain pump
Large food residues or foreign objects that have not been retained by the filters may block the
wastewater pump. The rinsing water will then stagnate above the filter.
Warning: risk of cutting yourself!
When cleaning the waste water pump, be careful not to injure yourself with pieces of glass
or sharp objects.
In this case:
1.
Always disconnect the appliance from the power source first.
2.
Remove the racks.
3.
Remove the filters.
4.
Scoop out the water, if necessary, with a sponge.
5.
Check the surface and remove any foreign objects.
6.
Install the filters
7.
Put the racks back in place.
Useful information
32
EN