Info - Metrohm 774 Oven Sample Processor Manual De Instrucciones

5.11.3 &Info ...
5.11.3.1
5.11.3.2
5.11.3.3
5.11.3.4
5.11.3.5
5.11.3.6
774 Oven Sample Processor, Instrucciones para el uso
5.11 Description of the remote control commands
Info.Report
Info.Report.Select
$G sends the selected report via RS interface.
full: Full result report (identifier 'fr)
short: Short result report (identifier 'sr)
config: Configuration report (identifier 'co)
param: Parameter or method report (identifier 'pa)
user meth: Listing of method storage (identifier 'um)
all: Full report
Reports, that are sent from the changer are marked with a space (ASCII 32)
and the specific report identifier (see above).
Info.DetermData.Mplist.1.Y
up to .400.Y
Indexed list of the measuring points of the oven temperature. The time in-
terval between the individual measuring points is defined by node
&Mode.Report.TDelta.
Info.DetermData.Errorlist.1.Time
Info.DetermData.Errorlist.1.ErrNo
up to .10.Time bzw. .10.ErrNo
Up to 10 error messages per sequence are stored in the error list. Besides
the instant of occurrence (from the start of the sequence, in seconds), the
error number (see RS error list Page 102) is also stored.
Info.Results.TempSet
Info.Results.LowTemp
Info.Results.HighTemp
Info.Results.Gasflow
Info.Results.Lowflow
Info.Results.Highflow
Info.Results.SmplHeatTime
The results each refer to the current sequence.
Info.ActualInfo.Meas.CyclNo
Info.ActualInfo.Meas.OvenTemp
Info.ActualInfo.Meas.Gasflow
$Q sends the current, measured values.
Info.ActualInfo.Lift.1.Exist
Info.ActualInfo.Lift.1.MaxHeight
Info.ActualInfo.Lift.1.ActHeight
Info.ActualInfo.Lift.1.Beaker
Info.ActualInfo.Lift.2.Exist
Info.ActualInfo.Lift.2.MaxHeight
Info.ActualInfo.Lift.2.ActHeight
Info.ActualInfo.Lift.2.Beaker
Current data of lift 1 and 2.
Exist: Tower exists (yes/no)
MaxHeight: Preset max. height
full, short, config, param, usermeth, all
$G
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
119