Metrohm 774 Oven Sample Processor Manual De Instrucciones página 126

5 Descripción detallada
5.11.3.7
5.11.3.8
5.11.3.9
5.11.3.10
5.11.3.11
5.11.3.12
5.11.3.13
120
ActHeight: Current lift position
Beaker: Beaker exists at tower X (yes/no)
Info.ActualInfo.Rack.Code
Info.ActualInfo.Rack.Type
Info.ActualInfo.Rack.WorkHeight
Info.ActualInfo.Rack.RinseHeight
Info.ActualInfo.Rack.ShiftHeight
Info.ActualInfo.Rack.SpecialHeight
Info.ActualInfo.Rack.ActPos
Info.ActualInfo.Rack.Act2Pos
Current rack data.
Code: Identification code of the mounted rack
Type: Rack type
WorkHeight: Working position
RinseHeight: Rinsing position
ShiftHeight: Shifting position
SpecialHeight: Special position
ActPos: Current rack position at tower 1
Act2Pos: Current rack position at tower 2
Info.ActualInfo.Valve.State
Current valve state (on/off).
Info.ActualInfo.Pump.State
Current pump state (on/off).
Info.ActualInfo.OutHeater.State
Current status of the outlet heater of the transfer hose (on/off). The outlet
heater is 'on' when the oven control is activated, i.e. as soon as a HEATER
command is triggered either manually or in a sequence. The outlet heater is
also activated on switch-on if an initial temperature is set. It is switched off
automatically with a "HEATER off' command.
Info.ActualInfo.Fan.State
Current fan state (on/off).
Info.ActualInfo.Heating.State
Current value of the manipulated variable (control deviation) of the oven
heater (0...50).
Info.ActualInfo.Buret.1.State
Info.ActualInfo.Buret.1.Position
Info.ActualInfo.Buret.1.Cock
Info.ActualInfo.Buret.1.Type
Info.ActualInfo.Buret.1.Volume
etc. until .12
Current data of dosing drive.
State: Status (ready/busy)
Position: Piston position in mL
Cock: Cock position
Type: Type of dosing unit (685/700)
Volume: Burette volume
774 Oven Sample Processor, Instrucciones para el uso
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only
read only