aquatermic MCO18124D5812-05 Manual Del Usuario página 16

parameter checking. Select the parameter by pressing or button. Press
4) When the unit is 'OFF' (not on clock and timer setting status), press
password confirming each field with
pressing or and short press
and confirm with
For example: parameter 01, the relating value is 5°C:
Once the parameters have been set; the user cannot change the parameters optionally. Please ask a qualified
service person to do this when required.
- By pressing and buttons at the same time and hold for 5 seconds, the buttons are locked.
- By pressing and buttons at the same time and hold for 5 seconds again, the buttons are unlocked.
4. and buttons
Clock setting:
- Press button to entry the clock setting interface: hour icon "88:88" flashes;
- Press the and buttons to set the exact hour(s) and press
- Press the and buttons to set the exact minute(s) and press
The set clock time is displayed.
Timer setting:
- Press button for 5" to entry the timer setting interface: timer 'ON' hour icon "88:88" flashes;
- Press the and buttons to set the exact hour(s) and press
- Press the and buttons to set the exact minute(s) and press
- Press the and buttons to set the exact hour(s) and press
- Press the and buttons to set the exact minute(s) and press
Timer 'ON' and timer 'OFF' icons are displayed near the clock time.
Press button to cancel the timer settings during the timer 'ON' and timer 'OFF' programming, returning in this way to clock
time visualization.
The timer settings are repeating and are still valid after a sudden power cut.
5. button
Press this button to turn 'ON' or turn 'OFF' the electrical heater. The electrical heater will work according to the control
program.
When the unit is 'ON', press this button for 5" to enable or disable the fan ventilation function.
6. Error codes
During standby or running status, if there is a malfunction, the unit will stop automatically and show the error code on the
right screen of the controller.
16
button to entry the installer parameter setting. Select the parameter by
button to access the parameter value. Press or button to adjust the value
button. Press to exit.
to exit.
and buttons together for 2" and insert the
to confirm: minute icon "88:88" flashes;
to confirm and exit.
to confirm: timer 'ON' minute icon "88:88" flashes;
to confirm: timer 'OFF' hour icon "88:88" flashes;
to confirm: timer 'OFF' minute icon "88:88" flashes;
to confirm.