Ryobi RLT430CESB Manual De Utilización página 17

Lubricant
Switch
10
10
10
10
10
10
Blade hazard
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
WARNING:
English(Original instructions)
Use 4-stroke lubricant for air cooled engines.
On/Off Switch
I = On to Run
O = OFF to Stop
Conforms to all regulatory standards in the country in the EU where
the product is purchased.
Run position
Full choke position
Half choke position
Place the engine switch to the "I" position
PRIME - press the primer bulb 10 times slowly
SET start lever to the "FULL CHOKE" position
Pull the starter rope until the engine attempts to start
Set the start lever back to the RUN position.
NOTE: If the engine stops, set the start lever to the RUN position and
pull the starter grip until engine starts
Squeeze throttle trigger to run
To stop the unit: Place the engine switch to the "O" position
Keep hands away from blades.
GOST-R conformity
SIGNAL
Indicates an imminently hazardous situation, which, if not avoided, will result in
DANGER:
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
MEANING
15