Oce CS6407 Guía De Consulta Rápida página 14

11
Remove the tension bar from the tension bar
hook.
12
Loosen the knob screw of each tension bar
hook and extend it laterally.
Knob screw
Tension bar hook
13
Set a dolly under the media and lift the media
to remove it.
Recommended dolly
Media
<Media at the supply side>
1
Set the printer to the offl ine state by pressing
the key.
O N L I N E
I N K M E D I A R E G
M E D I A M . A D V
2
Press the key.
The TUR's take-up switch is activated by selecting
media.
3
Lift the slackened part and remove the tension
bar at the supply side.
Printer rear (supply side)
<Media in general>
Tension bar n b n n a
Switch
Peel roller
Scroller
Tension bar
14
All manuals and user guides at all-guides.com
4
5
6
Peel roller
S size tension bar
<Vinyl chloride media>
Caution
- Do not ratate the peel roller, or the printer may be
damaged.
Rotate the pressure control knob clockwise to
raise the pressure roller.
Takeup side
or
Pressure control knobs
Rotate the scroller fl ange manually to take up
the media.
Remove the scroller fl ange of the printer.
Scroller fl ange e
Supply side
Printer rear Printer rear (supply side)