Ecolab EcoAdd Instrucciones De Servicio página 282

Control/software
[Setting Operating mode] [Pulse] [Concentration] [%] or [ppm]
[Setting ppm]
Fig. 30: [Changing the Pulse] [Concentration] [ppm] at the operating level
1.
On the screen, press the displayed [Concentration] [ ppm] for approx. 2 seconds.
2.
This step can be skipped if there is no password query here.
ð The screen switches to the view for setting the [ppm] value.
ð The settable range is already set by default.
3.
[Use the slider to se the ppm] value.
4.
[Press the Menu button]
ð The settings are saved and the pump switches back to the operating screen.
The new 'Application concentration ' is displayed on the operating screen.
MAN046939 Rev. 6-10.2021
2
1
If you have activated the [access code]
Ä Chapter 8.5 'Main menu' on page 63 .
We strongly recommend setting the access code!
Ä Chapter 8.8.4 'Access code' on page 93
.
3
, note the following:
78
4