Ecolab EcoAdd Instrucciones De Servicio página 305

Acknowledge automatically:
The pump switches to Pause on empty signal and the empty signal symbol is displayed in
red . The suction lance issues a "Full" signal to the pump after a container change and
the container change is detected and accepted without further confirmation.
Fig. 49: Acknowledge automatically
[Setting Acknowledge automatically]:
1.
[Call the main menu]:
2.
[Select Configuration]:
3.
Use the scrollbar to go to the [Empty signal] menu item.
4.
[Select Empty signal].
5.
If required, select 'Empty message contact' : 'Closed contact = empty signal'
ð After selecting this, a tick mark
6.
[ Press the Next button]
ð Screen changes to the acknowledgement query of the 'empty signal' .
7.
[Select Acknowledge automatically]:
8.
Press the button to save the setting.
ð The screen switches to the [Configuration] overview.
9.
Press the button to return to the [Main menu].
10. Press the
button to return to the [Operating display].
3
5
4
Ä Chapter 8.5 'Main menu' on page 63
Ä Chapter 8.8 'Configuration' on page 89
is set in the selection field.
.
101
Control/software
6
7
MAN046939 Rev. 6-10.2021
8