Connecting The Solar Power System Cable - Conergy IPG T Serie Instrucciones De Servicio

5 Installation
Result
34
9. Turn the bayonet connection (6) clockwise until the
sealing holes (8) are aligned.
10.Activate the fixing element (7) using a slot-head
screwdriver.
The mains power supply is connected.
5.3

Connecting the solar power system cable

Requirements
| Check the polarity of the solar power system cable.
| Check the voltage of the solar power system cable.
| Solar power system cable:
| Cable section 1.5–10 mm
Contact sockets for 4 mm
delivery.
| Cable diameter 5 to 8 mm
| Tin-plated cable
| Switch position of the DC switch disconnector at 0.
1
5.1: Switch position 0
| Switch position 0: there is no power to the power unit
for the string inverter.
Operating manual
2
2 2
, 6mm included in the
0
1
0
Conergy IPG T series