Tool Composition; Technical Data; Safety Devices; Symbols And Warnings - CAMPAGNOLA POWER ECO Manual De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
3.5

Tool composition

Pos. Denomination
1
Handle
2
Pole fixing screws
3
Pole fixing clamp
4
Shell connector
5
Identification sticker
6
Battery pack clamp
7
ON-OFF switch
8
Fuse holder
9
LED
10
Extension drive shaft
11
Fixed pole
12
Telescopic pole
13
Power cable connector
14
15 m power cable
3.6

Technical data

Technical data
Power unit weight
Motor rotation speed
3.7

Safety devices

Bright ON-OFF LED (9): indicates that the tool is working.
Max. motor absorption limit: 15 fuse (8).
3.8

Symbols and warnings

General warning
Reading the Use and
Maintenance Manual is
mandatory
Head and hearing protection is mandatory
4

INSTALLATION AND START-UP

4.1

Start-up

Extract the power unit (1) and the cable (14) from the relevant holder.
Fit the power unit on the pole with the selected tool, engage the transmission shaft (10) and tighten the screws (2)
of the clamp (3).
Insert the power cable (14) into the handle slot.
Connect the power cable (14) to the connector (4), respecting the male-female couplings and using the anti-error
to direct the connector PINs.
Turn the tool on by pressing the ON-OFF switch (7) and check that the LED (9) turns on.
The tool fitted on the pole starts working immediately when the power unit is turned on. Be sure to position
the tool away from people or property. Failure to comply with the warning is potentially dangerous for opera-
tor safety.
Page 24
Function
It houses the gearmotor, the electronic board and the switches
They allow the extension poles to be blocked
Secures the extension poles
Connects the power unit with the power cable
Shows the identification details
Connects the power cable with the battery poles
Turns the tool on and off
Contains the protection fuse
Indicates whether the tool is on or off
It transmits motion from the power unit to the mechanical head
Tool support
Tool support
Connects the power cable with the power unit
Connects the power unit with the lead battery pack
POWE.0123
1,250 rpm ± 5% rpm at 12V
950 g
1,200 rpm ± 5% rpm at 12V
Adequate clothing is mandatory
Hand protection is mandatory
Foot protection is mandatory
Use and Maintenance Manual – Translation of
Original Instructions Rev.: 03, Date 30/11/2021
Picture
A
A
A
A
B
E
D
D
D
E
E
E
D
E
POWE.0126
950 g

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Power 12

Tabla de contenido