Replacing The Start Switch And Lamp - NAMCO MAZAN Manual Del Operador

7-6-1

Replacing the Start Switch and Lamp

1. Remove the Control Panel.
2. Remove the Switch and Lamp assembly from the Switch Holder by pulling
the assembly straight out.
3. Remove the lamp by pulling it straight out from the Switch assembly.
4. Replace the lamp or switch.
Note: When replacing the Switch, ensure that the correct coloured wires
are connected to the correct terminals.
Control panel (R)
5. Re-assemble in reverse order.
(see7-6 page 70)
Yellow
Blue
Start switch
Faston terminal
Lamp
Start switch
Page 71
Green