Replacing The Sensor Pcb - NAMCO MAZAN Manual Del Operador

7-7

Replacing the Sensor PCB

1. Seperate the Front Assembly from the Monitor Base Assy.
2. Remove 4off pozi head screws (M5x25), with flat and spring washers, and
remove the PCB guard.
PCB guard
Pozi head screw
(with flat and spring washers) (M5 x 25)
3. Disconnect the five connectors and two terminals.
Connector
Terminals
Connector
Connector
Page 72
(see 5-2 page 35)
Connector
Connector
PCB base