Optional Cmt300-T064 Template - CMT ORANGE TOOLS CMT300 Manual De Instrucciones

OPTIOnAL CMT300-T064 TeMPLATe

5) Optional CMT300-T064 template
The CMT300-T064 template can be purchased as an optional and enables to make mini half-blind
dovetail joints.
11.3mm
6mm
Mini half-blind
dovetail joints
6.35mm
(CMT300-T064)
(1/4")
Contents of the CMT300-T064 package:
from
26) CMT300-T064 template
CMT300
14) Four M4x8mm screws
37) Two Ø15.8x6mm stop rings
38) Two Ø28.6x4mm stop rings
10) Four M4x16mm screws
33) Ø7.8x4mm guide ring
22) Two M5x8mm screws
23) 2.5mm hex key
from
CMT300
Mounting the template: this template is mounted in the
same way as the standard model.
Overhead view
Remove the standard template from the CMT300 system
and replace it with the 26 template, fixing it on the
supports (13 - included in the CMT300 package), using
the screws (14). The stop rings (37 and 38) replace those
supplied as standard.
Front view
The 38 rings, which have a larger diameter than the 37
ones, are mounted on the front in F2, whereas the other
37 rings are mounted on the top part, in U1.
Fitting the guide ring: to use this template, it is necessary to dismantle the guide ring already on the
router, and replace it with the other ring (33). Then mount a dovetail bit (718.060.11 with Ø6mm shank or
818.064.11 with Ø6.35mm shank) to carry out the machining.
9
www.cmtutensili.com