Muskoka Dwyer Instrucciones De Montaje página 4

Step 4
Line up holes in base (1) with wood dowels (a), and holes in each
of the right side panel interior (4) and left side panel interior (5)
with cam lock dowels (d) in base (1). Push panels down until flush.
Tighten cam locks (e). Do not strip the cam locks by overtightening
them.
Step 5
Locate the right side panel exterior (2) and the left side panel
exterior (3). Insert 2 wood dowels (a) into the 2 holes at the bottom
edge of each of the right side panel exterior (2) and left side panel
exterior (3). Line up holes in base with wood dowels (a) and push
panels down until flush.
Step 6
Once right side panel exterior (2) and left side panel exterior (3) are
flush to base (1), insert large bolt (b) through washer (c) and into the
base of each exterior panel. Tighten until secure.
Step 4
Step 5
Hardware used
a wood Dowel
Step 6
Hardware used
b large Bolt
c washer
3
4
5
1
3
1
a
b
c
1
3
2
x 4
2
x 4
x 4