Muskoka Dwyer Instrucciones De Montaje página 8

Step 16
Locate the right door (12) and left door (13). Open the hinges on
each of the right side panel exterior (2) and left side panel exterior
(3). Place the open side of each hinge into the recessed area on
each of the right door (12) and left door (13). Insert and tighten 2
hinge screws (k) into each of the 2 holes in each hinge. Make sure
the doors are level. You can adjust the doors at this point in your
assembly.
Step 17
Locate shelves (14) and mounting pegs (l). Press 8 mounting pegs (l)
into position on the following parts:
• 2 mounting pegs (l) into each of the
exterior left and right side panels (2 and 3)
for a total of 4 mounting pegs (l).
• 2 mounting pegs (l) into each of the
interior left and right side panels (4 and 5)
for a total of 4 mounting pegs (l).
Place 1 shelf (14) on each set of 4 level mounting pegs (l).
Step 18
Add 1 wood handle (h) to each door by inserting 1 small bolt (i)
from the inside of the door through the hole and into the wood
handle (h). Tighten with small bolt (i) until secure. Repeat for
other door.
Step 16
Hardware used
k Hinge Screw
Step 17
Hardware used
l Mounting Pegs
Step 18
Hardware used
i Small Bolt
h wood Handle
7
12
13
k
x 8
12
l
14
13
x 8
12
13
h
x 2
x 2
h