Muskoka Dwyer Instrucciones De Montaje página 5

Step 7
Insert 8 wood dowels (a) into the holes on the top edge of the right
side panel exterior (2), left side panel exterior (3), right side panel
interior (4), and left side panel interior (5). Insert 4 cam locks (e)
into the holes on the top of the inside of the left side panel interior
(5) and the right side panel interior (4). Make sure the arrows on
the 4 cam locks (e) are pointing upwards to be joined with the
central shelf (8).
Step 8
Locate central shelf (8). Insert 4 cam lock dowels (d) into the holes
on top of central shelf (8). Insert 4 cam lock dowels into the holes on
the bottom of central shelf (8). Make sure the threaded side is down
so you can insert and tighten each cam lock dowel (d) into each
hole in central shelf (8).
Step 9
Line up the cam lock dowels (d) on the bottom of central shelf (8)
with the holes at the top of right side panel interior (4) and left side
panel interior (5). Line up the 8 wood dowels with the holes in the
bottom of the central shelf (8). Press the central shelf down onto the
lower assembly until flush.
Once flush, tighten the 4 cam locks (e) on the inside of the left side
panel interior (5) and the right side panel interior (4). Do not strip
the cam locks (e) by overtightening them.
Insert large bolt (b) through washer (c) through right side panel
exterior (2) and up into the central shelf (8). Tighten until secure.
Repeat for the left side panel exterior (3).
Step 7
Hardware used
a wood Dowel
e Cam lock
Step 8
Hardware used
d Cam lock Dowels
Step 9
Hardware used
b large Bolt
c washer
4
a
e
2
a
4
5
1
3
d
8
d
8
4
2
5
c
1
3
b
x 8
x 4
x 8
x 4
x 4