Muskoka Dwyer Instrucciones De Montaje página 6

Step 10
Place 4 wood dowels (a) into the holes on the top of the central
shelf (8). Locate the right side storage panel (6) and the left side
storage panel (7). Insert 2 cam locks (e) into the 2 bottom holes on
the inside of each of the right side storage panel (6) and the left
side storage panel (7). Make sure the arrows on the 4 cam locks (e)
are pointing downward to be joined with the central shelf (8).
Step 11
Line up the holes in the right side storage panel (6) and the left side
storage panel (7) with the wood dowels (a) and cam lock dowels
(d) in the central shelf (8). Press down on the side storage panels
until secure with central shelf (8).
Once flush, tighten the 4 cam locks (e) on the inside of the left side
storage panel (7) and the right side storage panel (6). Do not strip
the cam locks (e) by overtightening them. Place 1 plastic cam cap (f)
onto each of the 4 cam locks (e).
Step 12
Place wood dowels (a) into the center 2 holes on the left side
storage panel (7) and the right side storage panel (6). Insert 2 cam
locks (e) into the holes on the top inside of each of the left side
storage panel (7) and right side storage panel (6). Make sure the
arrows on the 4 cam locks (e) are pointing upward to be joined
with the top (11).
Step 10
Hardware used
a wood Dowel
e Cam lock
Step 11
Hardware used
f Plastic Cam Cap
Step 12
Hardware used
a wood Dowel
e Cam lock
5
e
a
8
7
a
f
8
7
a
e
a
8
7
6
x 4
x 4
6
x 4
6
x 4
x 4