Setting The Time Manually; Turning On Night-Mode ® Feature; Adjusting Contrast; Turning Button Beep On And Off - Timex IRONMAN EASY TRAINER Manual Del Usario

SETTING THE TIME MANUALLY

While it is easiest to allow the GPS to set the time for you based on selected time zones, you can set either
time zone manually.
1. Press MODE until SET displays.
2. Press - or + to select TIME, then press OK.
3. Press + or - to select the time zone (TIME 1 or TIME 2) to set, then press OK.
4. Press + or - to select MANUAL, then press OK.
5. Press + or - to change hours, then press OK to move to the next field.
6. Repeat step 5 for minutes, seconds, year, month, day, time format, and date format.
7. Press MODE to exit.
SELECTING THE TIME DISPLAY
You can set two time zones on the watch to keep time in different time zones. By default, TIME 1 is the pri-
mary time zone that displays in Time mode, but you can view TIME 2 or make it the primary time zone.
• In Time mode, press VIEW to see the time in your secondary time zone.
• In Time mode, hold VIEW to make the secondary time zone primary.
TURNING ON NIGHT-MODE
Normally, you must press INDIGLO
any button press between the hours of 6 p.m. and 7 a.m. in the primary time zone turns on the night-light.
1. Press MODE until SET displays.
2. Press + or - to select NIGHT, then press OK.
3. Press + or - to select ON, then press OK.
4. Press MODE to exit.

ADJUSTING CONTRAST

Contrast settings determine how dark the text on the watch screen appears. Raise the contrast setting for
darker text, and lower the setting for lighter text.
1. Press MODE until SET displays.
2. Press + or - to select CONTRAST, then press OK.
3. Press + or - to select the contrast value, the press OK.
4. Press MODE to exit.

TURNING BUTTON BEEP ON AND OFF

Select whether or not the watch emits a beep when any button is pressed.
1. Press MODE until SET displays.
2. Press + or - to select TONE, then press OK.
3. Press + or - to select ON or OFF, the press OK.
4. Press MODE to exit.
When TONE is ON, the
You can also set the button beep when setting the alarm. See

RESETTING THE WATCH

You can return all settings to their factory defaults. Your user profile and workout data are preserved.
• Press INDIGLO , MODE, START/SPLIT/+ and STOP/SAVE/- simultaneously and hold.
®
FEATURE
®
button to turn on the night-light. When the Night Mode
®
icon displays in the lower right of the display.
Setting the Alarm Time
10
feature is active,
®
for more information.