18
48. Position the WCM (3) through the radio cavity and
over the ignition switch (4).
securing the WCM, tighten the fastener securely.
49. Install the fasteners securing the ignition switch (4).
Tighten the fasteners securely.
50. Install the ignition antitheft bracket (2). Install the fas
tener securing the bracket. Tighten the fastener se
curely.
51. Align and position the upper pad to the base I/P. Hand
tap to engage the retaining clips.
52. Install the fasteners (2) securing the upper I/P pad to
the base panel. Tighten the fasteners securely.
53. Looking in from the glove box cavity, connect the PAB
squib connectors and install the nuts (1) securing the
PAB to the I/P structure. Tighten the nuts to 8 N∙m (71
in. lbs.).
Jan 19, 2011
Install the fastener
4280359
K6861247