Mopar 4280359 Manual Del Usuario página 5

9. Route the kit supplied harness (2) from the hood ajar
switch assembly (1) above the existing vehicle har­
ness located above the cooling fan to the driver side
of the vehicle.
10. Using the supplied tie wraps in the kit, secure the hood
switch harness (2) to the existing vehicle harness lo­
cated above the cooling fan. Once secured, clip the
excess off from the tie wraps.
11. Continue routing the hood ajar switch harness (1) to
the Totally Integrated Power Module (TIPM) area. Se­
cure the harness with tie wrap as needed.
12. Remove the cover from the Totally Integrated Power
Module (TIPM) (1).
13. Using a suitable flat blade tool, disengage the TIPM's
upper retaining tabs (2) and lift up to remove the TIPM
(1) from it's bracket.
Jan 19, 2011
4280359
5
K6861247