6. if necessary, replace any damaged
components and tighten any
screws and loose bolts or contact
the authorised service centre;
7. Store the machine:
• in a dry place;
• protected from inclement weather;
• in a place out of children's reach;
• making sure that keys or tools used
for maintenance are removed.
8.2 STORING THE BATTERY
The battery must be kept in a cool,
shaded place without humidity.
NOTE
In case of prolonged inactivity,
recharge the battery every two months
to prolong its service life.
9. HANDLING AND TRANSPORT
Whenever the machine is to be
handled or transported you must:
1. stop the machine (par. 6.5);
2. disconnect the machine from the
battery backpack (Fig. 4).
3. remove the battery from its housing
and recharge it (para. 7.2.2);
4. only hold the machine using the
handgrips and position the tubes so
that they do not case obstruction.
When transporting the machine
on a vehicle, always:
1. remove the tubes;
2. Properly secure the machine;
3. position it so that it does not
cause a hazard to anyone.
10. ASSISTANCE AND REPAIRS
This manual provides all the necessary
information for the correct operation of the
machine and the correct basic maintenance
operations which can be performed by the
user, as described at par. 3.1.4. Any regulations
and maintenance operations not described
herein must be carried out by your Dealer
or Authorised Service Centre, which have
the necessary knowledge and equipment to
ensure that the work is carried out correctly,
maintaining the correct degree of safety and the
original operating conditions of the machine.
• Any operations performed in unauthorised
centres or by unqualified persons will totally
invalidate the warranty and all obligations
and responsibilities of the manufacturer.
• Only Authorised Service Centres can carry
out guaranteed repairs and maintenance.
• The Authorised Service Centres only
use genuine spare parts. Genuine
spare parts and attachments have been
designed specifically for machines.
• Non-original parts and attachments are
not approved; use of non-original spare
parts and attachments will jeopardise
the safety of the machine and relieve the
Manufacturer from all obligations or liabilities.
• It is advisable to send your machine
once a year to an Authorised Service
Centre for servicing, assistance
and safety device inspection.
11. WARRANTY COVERAGE
The warranty covers all material and
manufacturing defects. The user must
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover damage caused by:
• failure to become familiar with the
documentation accompanying the machine;
• carelessness;
• incorrect or forbidden use or assembly;
• use of non-genuine spare parts;
• use of attachments not supplied or
not approved by the manufacturer.
The warranty does not cover:
• normal wear and tear of
consumable materials;
• normal wear of the machine.
The purchaser is protected by his or her own
national legislation. The purchaser's rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
EN - 14