4.3
Displays in the Operating Display
Symbol
Designation
[Counting] display
[Weighing in percent]
display
[Calculation] display
[Animal weighing]
display
[Net-total] display
[Totalizing] display
[Density determination]
display
[Statistics] display
[Peak hold] display
[Checkweighing] display Indicates that the "Checkweighing" application is selected .
[Busy] display
[Sign] display
[Zero] display
[AUTO] display
[Application help]
display
[R12] display
[Printer] display
[PC-Connect] display
[Percent] display
[Net] display
Description
Indicates that the "Counting" application is selected .
Indicates that the "Weighing in percent" application is selected .
Indicates that the "Calculation" application is selected .
Indicates that the "Animal weighing" application is selected .
Indicates that the "Net-total" application is selected .
Indicates that the "Totalizing" application is selected .
Indicates that the "Density determination" application is selected .
Indicates that the "Statistics" application is selected .
Indicates that the "Peak hold" application is selected .
Indicates that the device is processing a command .
Indicates whether the value being displayed is positive or negative .
For some conformity-assessed devices: Indicates that the device has been zeroed .
Indicates that the "Animal weighing" application starts automatically .
− Indicates the number of components for "Totalizing", "Net total", and "Statistics" .
− Indicates the minimum limit "LL" and the maximum limit "HH" during
"Checkweighing" .
Indicates the active range for multi-range balances .
− Indicates that a printer has been detected at the USB port .
− Flashes if the data output is active .
− Indicates that a PC or a second display has been detected at the USB port .
− Flashes if the data connection is active .
Indicates that a percentage value is being displayed .
Indicates that a net value is being displayed .
Operating Concept
Entris
®
BCE Operating Instructions
11