Device"/"Extras" Menu - Sartorius Entris BCE6202 Instrucciones De Manejo

Parameter Setting values
BAUD** 600, 1200,
2400, 4800,
9600*, 19200,
38400, 57600,
115200
PARITY** ODD*
EVEN
NONE
STOPBIT** 1 BIT*
2 BITS
HANDSHK .** SFTWARE
HARDW .
NONE*
DATABIT** 7 BITS
8 BITS*
DEV .USED NONE*,
PRINTER, VIRT .
COM, PC HOST,
REM .DISP .
* Factory setting
** Are blocked if "PRINTER" or "REM .DISP ." are displayed under "DEV .USED"
7.3.5

"DEVICE"/"EXTRAS" Menu

Parameter Setting values
MENU EDITABL .*
RD .ONLY
SIGNAL OFF
ON*
KEYS UNLOCKED*
LOCKED
EXT .KEYB . PRINT
CAL .
CF
ENTER
ZERO
TARE
APP
GLP END
NONE*
ON/STDB .*
ON MODE
ON/OFF
AUTO ON
* Factory setting
Explanations
Sets the baud rate to the selected value .
Applies an odd parity .
Applies an even parity .
Does not apply a parity .
Sets the number of stop bits to 1 .
Sets the number of stop bits to 2 .
Sets the handshake protocol to software handshake .
Sets the handshake protocol to hardware handshake .
Does not set a handshake protocol .
Sets the number of data bits to 7 .
Sets the number of data bits to 8 .
Indicates which connection is detected at the USB port .
Explanation
Activates write access . The menu parameters can be changed .
Activates read access . The menu parameters cannot be changed .
Switches the acoustic signal off .
Switches the acoustic signal on .
Deactivates the button lock .
Activates the button lock .
Assigns the print function to the external key .
Assigns the calibration and adjustment function selected under [CAL ./ADJ .] to the external
key .
Assigns the [Back] function to the external key .
Assigns the [Confirm] function to the external key .
Assigns the [Zero] function to the external key .
Assigns the [Tare] function to the external key .
Assigns the [From] function to the external key . The function is triggered for an application
that is not active .
Assigns the [GLP] function to the external key .
No function is assigned to the external key .
The [On/Off] button switches between on/standby with time .
The [On/Off] button switches between on/standby without time . .
Changes the function of the [On/Off] button: The device no longer switches off or to standby
mode, instead it starts a boot process .
System Settings
Entris ® BCE Operating Instructions 21