Device"/"Rs232" Menu; Device"/"Usb" Menu - Sartorius Entris BCE6202 Instrucciones De Manejo

System Settings
7.3.3

"DEVICE"/"RS232" Menu

Parameter Setting values
DAT .REC . XBPI
SBI*
REM .DISP .
BARCODE
YDP20
YDP30
OFF
BAUD 600, 1200,
2400, 4800,
9600*, 19200,
38400, 57600,
115200
PARITY ODD*
EVEN
NONE
STOPBIT 1 BIT*
2 BITS
HANDSHK . SFTWARE
HRDWARE*
NONE
DATABIT 7 BITS
8 BITS*
* Factory setting
7.3.4

"DEVICE"/"USB" Menu

Parameter Setting values
DAT .REC .** XBPI
SBI*
REM .DISP .
PC .SPREA .
YDP20
YDP30
PC .TEXT
OFF
* Factory setting
** Are blocked if "PRINTER" or "REM .DISP ." are displayed under "DEV .USED"
20 Entris ® BCE Operating Instructions
Explanations
Extended range of commands to control numerous balance functions with binary protocol for
direct communication with the device .
Enables SBI communication . The data is output to a PC or control unit . Enables the use of ESC
commands from a PC to control the basic balance functions with ASCII protocol .
Enables data output on another display .
Allows for the connection of an approved barcode scanner .
Sets the standard settings of YDP20 printers .
Sets the standard settings of YDP30 printers .
Deactivates the automatic data output .
Sets the baud rate to the selected value .
Applies an odd parity .
Applies an even parity .
Does not apply a parity .
Sets the number of stop bits to 1 .
Sets the number of stop bits to 2 .
Sets the handshake protocol to software handshake .
Sets the handshake protocol to hardware handshake .
Does not set a handshake protocol .
Sets the number of data bits to 7 .
Sets the number of data bits to 8 .
Explanations
Extended range of commands to control numerous balance functions with binary protocol for
direct communication with the device .
Enables SBI communication . The data is output to a PC or control unit . Enables the use of
ESC commands from a PC to control the basic balance functions with ASCII protocol .
Enables data output on another display .
Enables data output to a spreadsheet program via a direct PC connection .
Sets the standard settings of YDP20 printers .
Sets the standard settings of YDP30 printers .
The balance transmits the data via keyboard command to the currently opened application on
the PC in text format .
Deactivates the data output .