Applic."/"Density" Menu; Applic."/"Statist." Menu; Applic."/"Peak.HLd." Menu; Applic."/"Check.WG." Menu - Sartorius Entris BCE6202 Instrucciones De Manejo

Parameter Setting values
DEC .PLCS NONE
1 DEC .PL .*
2 DEC .PL .
3 DEC .PL .
* Factory setting

7.3.16 "APPLIC."/"DENSITY" Menu

Parameter Setting values
DEC .PLCS NONE
1 DEC .PL .*
2 DEC .PL .
3 DEC .PL .
* Factory setting

7.3.17 "APPLIC."/"STATIST." Menu

Parameter Setting values
PRT .COMP . OFF
ON*
TAR .STAT . OFF*
ON
* Factory setting

7.3.18 "APPLIC."/"PEAK.HLD." Menu

Parameter Setting values
APPLY AT STAB .*
W/O STB .
* Factory setting

7.3.19 "APPLIC."/"CHECK.WG." Menu

Parameter Setting values
INPUT MANUAL*
WG .VALUE
AUTO .PRT . OFF*
ON
OK ONLY
NOT OK
* Factory setting
Explanation
The result of the "Calculation" application is displayed without decimal places .
The result of the "Calculation" application is displayed to 1 decimal place .
The result of the "Calculation" application is displayed to 2 decimal places .
The result of the "Calculation" application is displayed to 3 decimal places .
Explanation
The result of the "Density determination" application is displayed without decimal places .
The result of the "Density determination" application is displayed to 1 decimal place .
The result of the "Density determination" application is displayed to 2 decimal places .
The result of the "Density determination" application is displayed to 3 decimal places .
Explanation
Deactivates the component printout .
Activates the component printout .
Deactivates automatic taring after the components are saved .
Activates automatic taring after the components are saved .
Explanation
Peak values are applied when there is stability .
Peak values are applied without stability .
Explanation
The min/max limits are entered manually .
The entry of the min/max limits is carried out by applying the weight value .
The automatic printing is switched off .
With automatic printing, all values are exported .
With automatic printing, only values that are within the control range are exported .
With automatic printing, only values that are outside the control range are exported .
System Settings
Entris ® BCE Operating Instructions 25