Berner BHFL75 Instrucciones De Empleo página 24

The test results of the loading test and the charging process will be displayed on the
screen and written after the test in a test record on an SD card, which must be
plugged to the SD card slot on the front of the device. The output of the test report is
in HTML format and can be opened with the major browsers / word processors.
Before saving the audit you will be asked to enter the customer data:
Name, model, license plate, Chassis No, Odometer reading.
default.htm" stored with the file name.
In service mode, the charger provides a constant voltage and supplies the
vehicle electrical system if:
a.) An inspection / repair / customer service / service on the vehicle must be
carried out.
In this position, the charger balances the power consumption of the vehicle
until it reaches its maximum rated capacity of (buffer mode).
b.) The battery is disconnected. A loss of data in the on-board computer of the
vehicle is protected (sustained mode).
The board suitability is in all operating situations
guaranteed even during the re-/disconnect to the battery.
The serves as a file name for the scan log.
But you can save the log without entering
the customer data. In this case it is
"default.htm" saved with the file name.
you can save the log without entering the
customer data. In this case it
SERVICE OPERATION (12V + 24V)
23