GRAPHITE 58G072 Instrucciones De Uso página 16

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
● Whenever working tool can hit hidden electric wires or its own power cord during operation,
hold the power tool only by insulated surfaces of the handle. Contact with power supply line may
transfer its voltage to metal parts of the power tool and cause electric shock.
● Keep hands at safe distance from the cutting area. Do not put them under processed piece.
Contact with blade may cause injury.
● Switch off the jigsaw after work. Remove blade from processed piece only when it is at
standstill. This way you can avoid recoil and it is possible to safely put the power tool away.
● Use only undamaged blades in good technical condition. Bent, blunt blades may break,
additionally may affect cutting line and cause recoil.
● Certain wood and metal types may be dangerous to health and cause allergic reactions,
respiratory tract illness or be carcinogenic.
-
Use dust masks when cutting to protect your respiratory system against produced dust.
-
Use dust extraction system when cutting wood.
-
Always provide good ventilation of your workplace.
● Do not cut water system pipes with the jigsaw. Cutting a pipe may cause material damages or
electric shock.
● Carefully check the processed material before cutting to eliminate possibility of cutting nails, bolts, or
other hard objects.
● Do not cut objects thicker than allowed in technical specification for a given material.
● Hold the jigsaw in a closed hand.
● Ensure the jigsaw does not have contact with the material before pressing the switch.
● Do not touch moving parts with your hand.
● Do not put away the jigsaw until it stops moving. Do not switch the jigsaw on when not holding it.
● Do not touch the blade or processed material immediately after the work has been finished.
Those elements may be hot and may cause burns.
● When you see unusual behaviour of the tool or hear strange noises, immediately switch off the tool
and remove the plug from mains socket.
● To ensure proper cooling keep ventilation holes in the jigsaw body uncovered.
● Before connecting the jigsaw to mains socket make sure the supply voltage matches the voltage on
the rating plate of the tool.
● Each time before connecting the jigsaw check the power cord, in case of damage hand over to
authorized workshop for repair.
● Power cord of the jigsaw always must be on the safe side, where there is no danger of accidental
damage by operating power tool.
SAFETY RULES FOR LASER DEVICE
Laser device used in the jigsaw design is the class 2 with maximum power below 1 mW and wavelength
λ = 650 nm. Such device is not dangerous to eyes, however do not look directly at the source of the light
(temporary blindness hazard).
WARNING. Do not look directly at the source of laser beam. It may cause hazards. Follow the below
safety rules.
● Use the laser device in accordance with the manufacturer's instructions.
● Do not, either intentionally or unintentionally, point the laser beam at people, animals or any object
other than processed material.
● Do not bring to accidental pointing the laser beam at bystanders' or animals' eyes for a period longer
BLADE SAWING MACHINE (JIGSAW)
58G072
DETAILED SAFETY REGULATIONS
16