Publicidad
Idiomas disponibles
Idiomas disponibles
than 0.25 second, for instance by pointing the laser beam at mirrors.
● Always ensure the laser beam is directed at material which does not have any reflective surfaces.
● Reflective steel sheet (and other materials with reflective surface) does not allow for laser use,
because it might cause hazardous light reflection directed at operator, bystanders or animals.
● Do not replace laser unit with device of other type. All repairs must be carried out by the
manufacturer or authorized person.
Adjustments other than described in this manual put in danger of exposition to laser radiation!
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used, ne-
vertheless there is always a small risk of injuries at work.
Explanation of used symbols
1
2
1.
Read instruction manual, observe warnings and safety conditions therein.
2.
Device with class II insulation.
3.
Use personal protection measures (protective goggles, earmuff protectors, anti-dust mask)
4.
Disconnect the power cord before starting maintenance or operation.
5.
Protect against rain.
6.
Keep the tool away from children.
7.
Caution: Laser radiation.
CONSTRUCTION AND USE
Jigsaw is a hand-operated power tool with insulation class II. It is driven by a single-phase commutator
motor. The tool is designed for making straight, coarse cuts, curved cuts and holes in wood, wood-based
materials, plastics and metals (provided that appropriate blade is used).
Range of use covers repair and building works, and any work from the range of individual, amateur activities
(tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1.
Switch
2.
Switch lock button
3.
Adaptor
4.
Dust extraction outlet
5.
Footplate
6.
Guiding roller
7.
Blade holder
8.
Guard
LASER LIGHT, LASER RADIATION
DO NOT LOOK AT THE LASER BEAM
LASER DEVICE CLASS 2
Wavelength: 650 nm; Output: < 1 mW
EN 60825-1:2007
3
4
17
5
6
7
Publicidad
