Adding; Means Of Operation - RADWAG R Balances Serie Manual Del Usuario

The start of the next process of peak hold measurement is possible only after removing the
load from the weighing pan and pressing
window of <PEAK HOLD> mode, pictogram <Max> is automatically deleted.
CAUTION!
Current unit may be selected only if the weighing result is not snapped. In order to select the unit, Units/Esc
button is used. If any result has already been snapped than Esc button deletes the last snapped Max result.
11.13.

ADDING

Adding function allows you to add net masses of weighed samples.
This function enables adding maximum 9999 ingredients in one cycle or such quantity of samples
which value of totalized masses is possible to be displayed on 8-section display.
F Shortcut Keys
Function enables assigning quick access functions which are to be accessible by pressing F1, F2,
F3 or F4 keys.
For procedure informing you how to declare the particular function, read F Shortcut Keys section.
11.13.1.

Means of Operation

•
Enter <ADDING> mode.
The bottom line shows total sum and data relating to the number of ingredients which are
added to the total sum and the total mass (if such information is selected in the settings for
totalising mode).
•
Load the weighing pan with the first sample. Confirm its mass when stable by pressing
button.
Sample mass is saved to the sum. In the bottom line, data on ingredients quantity and total
sum is changed and data on saved measurement is printed.
•
Next, take off the first sample and load the weighing pan with the second. Confirm its
mass when stable by pressing
•
Carry out adding rest of the samples left in a measurement series.
•
If mass of the last added sample is incorrect, you can return to the previous step and on
changing the sample, add it again. In such case, follow the steps:
button. This causes returning to the main
button.
- 66 -