Product Description - Ottobock Terra Flair Instructions For Use

Temperaturen und Luftfeuchtigkeit
Luftfeuchtigkeit [%]
1 Foreword
INFORMATION
Date of last update: 2020-04-15
Please read this document carefully before using the product and observe the safety
►
notices.
Obtain instruction from the qualified personnel in the safe use of the product.
►
Please contact the qualified personnel if you have questions about the product or in case of
►
problems.
Report each serious incident in connection with the product, in particular a worsening of the
►
state of health, to the manufacturer and to the relevant authority in your country.
Please keep this document for your records.
►
INFORMATION
New information regarding product safety and product recalls as well as the declaration of
►
conformity can be obtained at oa@ottobock.com or from the manufacturer's service depart­
ment (see inside or outside of back cover for addresses).
You can request this document as a PDF file at oa@ottobock.com or from the
►
manufacturer's service department (see inside or outside of back cover for addresses). The
PDF file can also be displayed in a larger size.
These instructions for use provide important information regarding the installation and proper use
of the 476C00=SK87*/88* Terra Flair wheelchair seat cushion (custom size: 476C00=SA880).
All users and/or their attendants must be trained by qualified personnel in the use of the product
with the aid of these instructions for use. In particular, users and/or attendants must be informed
of the residual risks with the aid of the safety notices.
Please note the following:
• It may be necessary to adapt the product according to the needs of the user and the medical
conditions. Adjustments may only be made by qualified personnel and in close coordination
with the user.
• The manufacturer reserves the right to make technical changes to the model described in
these instructions for use.

2 Product description

The wheelchair seat cushion is used as a decubitus prophylaxis. It provides optimal pressure
redistribution and reduces shear forces.
The seating surface consists of an anatomically shaped rest suspension foam base (see fig. 1,
item 1) with an integrated air insert in the rear section (see fig. 1, item 2). The foam base distrib­
utes pressure over the largest possible surface area, thereby reducing pressure points. The seat
cushion provides postural stability due to the anatomically shaped recesses for positioning the
thighs and the ischium bone (see fig. 1, items 3, 2). The air insert can be individually adapted by
means of air pressure. This provides ideal protection for the most sensitive bony areas.
The foam base and air insert form the core of the seat cushion (see fig. 1) and are protected by a
liquid-repellent cover (see fig. 2).
The components of the wheelchair seat cushion have the following functions:
10 bis 85; nicht kondensierend
English
17