TOPITEC EXPERT Instrucciones De Uso página 73

3.2 Built-in safety systems
The built-in safety devices must be regularly checked and tested by an electrician as described
in the table below.
Interval
a = annually
Table 1 Test intervals for safety systems
1. Main switch (power switch)
By actuating the main switch, the TOPITEC
is connected to / disconnected from the power mains.
The main switch is located at the mains filter.
Danger
Before carrying out cleaning, maintenance or
repair work, switch off the main switch and also
disconnect the power cord from the mains socket.
2. Power supply
The TOPITEC EXPERT power supply system inside
®
the device consists of a 3 conductor, 1 phase system
with a GREEN/YELLOW PE conductor.
3. Earthing
The earthing of the electrically conductive components
of the TOPITEC EXPERT must be checked at regular
®
intervals.
Warning
The device owner must ensure that unauthorised persons
(i.e. persons who are not authorised to operate or service the device)
are prevented access to the device.
V = visual inspection
F = function test
M = measurement
EXPERT
®
Method
Check
Interval Method
a F
Check
Interval Method
a V, M
Check
Interval Method
a V, M
73