TOPITEC EXPERT Instrucciones De Uso página 89

6. OPERATION
Warning
The TOPITEC
who have been trained in its functions and control.
Note
Before starting production, ensure that there are no objects
(e.g. tools, residual material, etc.) on or near the
TOPITEC
6.1 Connection to power supply, interfaces
1. Main switch
(power switch)
2.
Fuse holder
(recessed)
3.
Power socket
(3-pin)
The rear panel of the TOPITEC
control devices and ports:
1. Main switch (power switch)
When this switch is ON, the TOPITEC
Warning
If the main switch needs to be switched off for cleaning, maintenance or
repair work, always disconnect the power cable from the power socket
(to prevent inadvertent switching on).
2. Fuse holder (recessed)
containing 2 fuses (5 x 20 fuses 10A (medium-acting, A-D14-1845)
3. Power socket (3-pin)
with phases and PE conductor; socket for conventional IEC-60320 C13/C14 cable plug. The
power cable must be connected to a properly
earthed power socket with a PE conductor.
4. LAN and USB ports (A+B) for maintenance,
PC or peripheral connection
5. AUX port (audio)
® EXPERT must only be operated by instructed personnel
EXPERT mixing system.
®
Fig. 6.1 Power connection, interfaces
EXPERT features the following
®
® EXPERT is powered from the power mains.
4.
LAN and USB port
(A+B) for mainte-
nance, PC or periph-
eral connection
5. AUX port (audio)
.
89