Storage; Identification Of The Installation - Nameplates; Terms Of Warranty - Ecolab DM Modular 20 Instrucciones De Manejo

1.2.3

Storage

Under certain circumstances, instructions for storage, which go beyond the
requirements listed here, can be found on the package.
These must be complied with accordingly.
Please note the following storage conditions:
Do not store outdoors.
n
n Store in a dry and dust-free place.
n Do not expose to aggressive media.
n Protect from sunlight.
n Avoid mechanical vibrations.
n Storage temperature: +5 to 40°C.
n Relative humidity: max. 80%.
n For storage periods of more than 3 months, check the general condition of all parts
and packaging regularly. If necessary, refresh or renew the preservative.
1.3

Identification of the installation - Nameplates

All information for the identification of the installation or the information on the
nameplate of the installation and all components are located in the chapter
"Technical Data ".
Important for inquiries is the correct specification of the designation and the
type. This is the only way of ensuring that we can answer your query correctly
and quickly.
1.4

Terms of warranty

The manufacturer only guarantees under the following conditions:
n Assembly, connection, adjustment, maintenance and repairs must be carried out by
qualified and authorised specialists with the aid of this operating instructions and all
instructions of delivered and build in components.
n All maintenance and service intervals of all components of this installation must be
observed and documented.
n The installation may only be used in accordance with this operating instruction.
n Only genuine replacement parts are to be used for repairs.
The pump is built according to current standards, guidelines and also tested
and certified according to the CE-Regulations.
The pump left our premises in absolutely perfect condition. To keep the
equipment in this condition and to ensure risk-free operation, all indications,
warnings and maintenance instructions contained in these operating instruction
and all instructions of the associated system components, or which are
attached on the components, must be observed.
In addition, the general warranty and service conditions of the
manufacturer apply!
9
General
Rev. 04-06.2018