Safety
2.2.1
Unauthorized alterations and production of spare parts
CAUTION!
Unauthorized conversions or modifications are only allowed by prior
permission and requires the approval of the producer.
Original spare parts and accessories authorized by the producer serve to
enhance safety.
The use of other parts excludes liability for the resulting consequences.
2.3
Lifetime
In relation to the dependence of the adequate maintenance protocols the life time is
2 years (visual and functional testing, replacement of wearing parts, etc.)
Afterwards a revision is necessary, in some cases also a subsequent general overhaul.
2.4
Safety measures taken by the operator
It is expressly up to the owner to train, monitor and instruct his operating and maintenance
personnel so that they comply with all of the necessary safety measures.
The frequency of inspections and controls must be complied with and documented.
2.5
Personnel requirements
Qualifications
DANGER!
Risk of injury if personnel are inadequately qualified!
If inadequately qualified personnel work on the system or are in the hazardous
area, hazards may arise that can cause serious injuries and significant material
damage.
– All work must be carried out by qualified personnel only!
– Keep unqualified personnel away from hazard areas.
NOTICE!
Only those individuals who can be expected to perform their work reliably are
authorised as personnel. Individuals whose reactions are impaired, e.g. by
drugs, alcohol, medicines, are not authorised. When selecting personnel,
the valid age and occupation-specific regulations must be observed.
Manufacturer
Certain work may only be carried out by specialist staff of the manufacturer or by staff
authorised or specially trained by the manufacturer. Other people or personnel are not
authorised to carry out this work.
To carry out the work required, please contact our customer service.
Rev. 04-06.2018
12