Medline MDS400SAB Manual Del Propietário página 10

Lift and Transfer from Commode
Medline Toileting Sling
The Medline Toileting Sling can be used with the Medline Stand Assist Lift to lift a patient in a
sitting position. When in use the Medline Toileting Sling supports the client under the thighs and
across the mid-back area.
Shoulder strap loop
Shoulder strap
Waist belt
Leg strap loop
Leg strap
The Medline Toileting Sling is not suitable for patients who have involuntary
movements or patients with limited postural control.
Fitting the Medline Toileting Sling
• Slide the sling down patient's back to lumbar position.
• Draw shoulder straps under the arms and around the chest into the front.
• Draw waist belt around waist and press together to fasten.
• Draw each leg support under the thigh.
• Crisscross leg straps by feeding one of the leg straps through the other strap.
• Attach shoulder straps to hooks in upper ends of the lifting arms.
• Attach leg straps to hooks in the lower ends of the lifting arm.
MEDLINE MDS400SAB, MDS600SAB | PIC-00364 (Rev: 10-13-20)
18
• The operator of the lift shall inspect the Medline Lift before each use. Check all
bolts for tightness. Make sure the base can be easily widened, and that all lift parts
are in place. Make sure that casters can be turned freely, and that caster brakes
can be engaged. Make certain all necessary items (i.e. slings, and wheelchairs, etc.)
are ready for use.
• At least once a month, the lift should be thoroughly inspected by a person qualified
to recognize any signs of wear and tear, and looseness of bolts or parts. Replace
any worn parts immediately.
• To lubricate, put a drop of oil on the following points when the Medline Lift is
placed into service and every month thereafter: Top of Mast, Spreader Hinge, and
Caster Axles.
First Received
Boom & Spreader Bar
Check connections between boom and
spreader bar for improper connection,
Check connections between boom and
mast for improper connection, looseness
or wear.
Check the boom for bending and deflection.
Mast
Check the mast for bending or deflection.
Base & Foot Pedal
Check bolts and nuts for looseness.
Check casters and axle bolts for tightness.
Check rubber parts on the casters
for deflection.
Apply grease to caster ball bearings
if needed.
Check welding joints for rust and crack.
Actuator & Control Box
Make sure the control box is firmly affixed
to the mast.
Make sure the actuator is secured to the
boom and mast with pins and key rings.
Make sure actuator plug into control box
is not loose.
Sling & Sling Hardware
Check sling for wear.
Check sling hardware every time before use.
Lift Cleaning
As Needed.
Monthly Every 3 Months
As Needed. As Needed.
1-800-MEDLINE (633-5463) | medline.com 19