Power Control Unit Overview
Battery Pack
Release Handle
Not Used
Actuator
1. Connect Actuator as shown above.
2. Connect Hand Control as shown above.
MEDLINE MDS400SAB, MDS600SAB | PIC-00364 (Rev: 10-13-20)
10
On/Off Switch
Emergency
Stop Button
Up/Down
Button
LCD Display
Battery Pack
Charger
DC In
Additional
Battery Pack
(Optional)
Charging
Cradle
(Optional)
Hand Control
Power: ON / OFF
ON
LCD Display Panel Signs - Power ON
When the power is turned ON, the LCD Display Panel will show one of the four signs below.
• The sign will display for 5 seconds.
• Then the lift will go into standby mode and the sign disappears.
• The lift is ready for use.
Charging: DC Charger or Charging Cradle
Charging
Cradle
(Optional)
DC Charger
(included)
LED
Indicator
* Amber = charging
* Green = charging completed
LCD Display Panel Signs - Charging
During charging, the LCD Display Panel will show one of the four signs below.
• The DC Charger must be connected.
• The Power must remain ON.
• The battery will not be charged if Power is OFF.
OFF
LED Indicator
* Green = power connected
* Blank = power disconnected
Charger Plug-in
1-800-MEDLINE (633-5463) | medline.com 11