Publicidad
Problem
Possible cause
Water tank has
been overfilled.
Steam lock
Fail to enter
cannot be
steam lock
activated.
function.
Steam does
Steam lock
not stop
function is
automatically
activated.
after placing
the steamer
head onto the
holder.
The board
Steam has
cover
condensed on
becomes
the board cover
wet or there
after a long
are water
steaming session.
droplets on
the garment
during
steaming.
Board is shaky
The poles are not
during use.
installed properly
or the board is
not secured onto
the poles.
The board lock is
not fully inserted.
The board is not
fully secure in
vertical position.
94
Solution
Fill water up to its MAX
marking.
Double tap to activate the
steam lock function ( refer to
).
Press once to deactivate steam
lock ( refer to
).
Leave it to dry before storage.
Replace the board cover if it
has worn out. Purchase a new
board cover from a Philips
Authorized Service Center.
Refer to
for correct
installation.
Insert the two board locks fully
until you hear a "click" sound
( refer to
).
Make sure that the board
tilting lever is in a locked
position before attaching it to
the poles ( refer to
).
Publicidad
