Publicidad
Problem
Possible cause
Board cannot
The board lock is
be tilted or be
not locked onto
used in
the pole.
horizontal
position.
The board tilting
lever has not
been released.
Water
Steam condenses
droplets drip
into water in the
from the
hose and affect
steamer head,
smooth steam
sometimes
flow.
the appliance
produces a
croaking
sound.
Dirty water,
Chemical or
brown stains
additives is
or white flakes
added into the
come out of
water tank.
the steamer
head and
stain the
garment.
Solution
Ensure that the board lock is in
a locked position ( refer to
Ensure unlocking tilting lever
to allow board to be tilted to
its desired position.
Once a desired position is
attained, lock the tilting lever
to secure board. ( refer to
)
Lift the steamer head to
straighten the hose vertically.
At the start of a steaming
session, set the steam setting
to be in MAX mode. Hold the
steamer head away from the
garment and press the steam
trigger for 10 seconds to
release the initial gush of water
droplets.
Never use chemical or additives
with the appliance. Fill the water
tank with water and allow it to
steam out 1 full tank to rinse off
chemical residues.
For stain on garment, rinse off
any stains under running water.
For stain on steamer head,
wipe any deposits off the
steamer head with a damp cloth.
).
/
95
Publicidad
